Planet Technology IP DSLAM IDL-4801 - Manual (Page 593)

IP DSLAM 593
5.24.3 SNTP Stats Commands
5.24.3.1 Get sntp stats
Description:
Use this command to get.
Command Syntax:
get sntp stats
5.24.3.2 Reset sntp stats
Description:
Use this command to reset.
Command Syntax:
reset sntp stats
Example:
$ get sntp stats
Output:
Verbose Mode On/Off
Requests count : 0 Response count : 0
Invalid Response count : 0 Lost Response count : 0
Last Time Stamp [MM/DD/YYYY::HH:MM:SS] : Thu Jan 01 00:00:00 1970
Output field:
Field Description
Requests count
This specifies the number of requests sent to SNTP
Server.
Responses count This specifies the Number of responses received from SNTP Server.
Invalid Responses
count
This specifies the Number of invalid responses received from SNTP
Server.
Lost Responses count
This specifies the number of responses which do not come within
time limit.
Last Time Stamp
[MM/DD/
YYYY::HH:MM:SS]
This specifies time at which the local clock was last set or corrected.
The display format shall be mm/dd/ yyyy:hr:min:sec.