Planet Technology IP DSLAM IDL-4801 - Manual (Page 594)

IDL series User Guide 594
5.25 System Commands
5.25.1 Cbuftrace cfg Commands
5.25.1.1 Get cbuftrace cfg
Description:
Use this command to get.
Command Syntax:
get cbuftrace cfg [module <module-val>]
5.25.1.2 Reset cbuftrace cfg
Description:
Use this command to reset.
Command Syntax:
reset cbuftrace cfg module <module-val>
Parameters:
Name Description
module <module-val> This specifies the module, for which c-buftrace configuration is to be modified
Type: Reset -- Mandatory
Get -- Optional
Example:
$ get cbuftrace cfg module GAG
Output:
module : GAG
flow : 3 level : 0xff
Output field:
Field Description
module This specifies the module, for which c-buftrace configuration is to be modified
flow This indicates a Hexadecimal bitmask, which sets the filter for c-buftrace flow.
level This indicates a Hexadecimal bitmask, which sets the filter for c-buftrace level.