Planet Technology IP DSLAM IDL-4801 - Manual (Page 613)

IP DSLAM 613
5.25.5.3 Get rmon idletime
Description:
Use this command to display a list of idle time records.
Command Syntax:
get rmon idletime [numentries <numentries-val>]
Parameters:
Name Description:
Numentries
<numentries-val>
This specifies last numentries idle time records
to be displayed
Type: Optional
Valid values : 1 to 6
Default : 10
Mode:
Super-User, User
Example:
$ get rmon idletime numentries 1
Output:
$get rmon idletime numentries 1
Start Time End Time Total
Idle Util %
Time Time
---------------------------------------------------------------------------
Thu Jan 1 12:34:51 1970 Thu Jan 1 12:35:00 1970 10s 7s 30
Output Fields:
FIELD Description
Start Time This specifies the starting time of the period for
which the idle time was recorded
End Time This specifies the end time of the period for
which the idle time was recorded
Total Time This specifies the total time (in seconds) elapsed
in this period.
Idle Time This specifies the time (in seconds) for which the