Planet Technology IP DSLAM IDL-4801 - Manual (Page 640)

IDL series User Guide 640
Verbose Mode Off
Set Done
Output Fields:
FIELD Description
Module This specifies the module for trace/log config whose
information is being displayed: It can be : GCOS,OAM,
CIN, GAG, CDB, CLI, ATM, EOA, TBG, DSLME, NVM,
FFC, DNCD, DATAME, GARP, GVRP, LACP
Flow This indicates a Hexadecimal bitmask, which sets the
filter for trace flow.
Level This indicates a Hexadecimal bitmask, which sets the
filter for trace level.
Type This specifies the type of logging to be done. It may be:
Syslog, Net, Stdout
Destn This specifies the IP address for host for logging for
trace type syslog and net. It is invalid incase of trace
type stdout
Port Port number on which host is listening for trace info to be
logged incase of trace type syslog and net. It is invalid
incase of trace type stdout
References:
z
get trace cfg command
z
get trace stats command.
5.25.14 Trace Log Statistics Commands
5.25.14.1 Get trace stats
Description:
Use this command to display trace statistics.
Command Syntax:
get trace stats
Parameters:
None