Planet Technology IP DSLAM IDL-4801 - Manual (Page 74)

IDL series User Guide 74
4.1.2.2 Download procedure
This section describes how to upload FD.cfg to IP DSLAM by tftp server. The
configuration procedure is shown as follows.
Step 1:
Prepare FD.cfg and tftp server. (Including file_id.diz, tftpd32.exe;TFTPD32.HLP
and uninst.exe)
Step 2:
Put the “FD.cfg” and “tftpd32” at the same folder on your PC.
Step 3:
Activate tftpd32 and then tftp32 window appears.
Step 4:
Click on to set the current directory where FD.cfg located.
Step 5:
Click Sever interface drop-down list to select the DHCP Server‘s IP.