Solare Datensysteme Solar-Log - Manual (Page 104)

104
Fronius
Fronius Symo and Galvo models
30�2 Fronius Symo and Galvo models
For the Symo and Galvo series, Fronius offers two different inverters:
•
Symo and Symo-Light.
The wiring instructions of the inverter to the Solar-Log™ are the same as the wiring of the Fronius inverter
with ComCard. See chapter „Fronius with ComCard“.
General information Symo and Galvo models
The standard Symo comes equipped with a Datamanager that acts as a bus master. The Datamanager
has to be removed to be able to communicate with the Solar-Log™. Since the Fronius Com Card is already
integrated in the Symo and Galvo models, no additional Com Card is required for network interface. The
Datamanager is not integrated into the Symo Light models.
Note
The Fronius Symo-/Galvo series is set by default to the „Solar Net“ protocol.
» Please check the setting.