Solare Datensysteme Solar-Log - Manual (Page 280)

280
TBEA
TBEA
Procedure
1. Insert the round plug into the COM round socket 1 on inverter 1
2. Connect additional inverters to each other according to the inverter instructions
3. Terminate in the last inverter according to the inverter instructions.
Allocate communication address
•
Recommendation: Continuous numbering starting with 1.
Address range 1 - 247.
•
Setting: Using the inverter’s operating display
•
Procedure: Start according to the inverter’s instructions
Note
Both bus ends have to be terminated.