Solare Datensysteme Solar-Log - Manual (Page 302)

302
Yaskawa
Yaskawa
Connect the inverters to each other
The inverters are connected together using the RS485 interface. Refer to the manufacturer's inverter ma-
nual for the details on how to setup the connection.
Allocate communication address
•
Recommendation: Continuous numbering starting with 1; highest possible address: 247.
•
Setting: Using the inverter operating display
•
Procedure: Start according to the inverter's instructions
Note
Please refer to the manufacturer's notes in regard to the addressing in the installation
manual.