Solare Datensysteme Solar-Log User Manual
Page 51
51
Benning
Benning
Detection from the Solar-Log
™
•
For the detection on the Solar-Log
™
, select "Benning" as the inverter manufacturer in the
Configu-
ration | Devices | Definition
menu from the
Network
section. Confirm the selection with
Save
.
Detection from the Solar-Log 1200
•
When using the Solar-Log 1200, the detection can also be started from the display. Select "Ben-
ning" as the manufacturer for the inverter detection from the "network" interface and start the
detection.
Note for feed-in management
Supported by Solar-Log
starting with inverter firmware version 19
Note
Using the inverter's web interface, select "External control via network interface" un-
der “Settings -> Installation -> Grid Company Settings -> Power Reduction," and under
“cos(phi) Settings.”