Solare Datensysteme Solar-Log - Manual (Page 19)

19
Connecting the inverters
Switch off the inverters and Solar-Log™.
2�1 Switch off the inverters and Solar-Log™�
Switching inverters off
Always turn off all of the inverters first before a making a cable connection between the Solar-Log™ and
the connections inside the inverter; and before installing an interface card in the inverter,
To do this, read the manufacturer's documentation for the inverter, and proceed as follows:
1. Disconnect the AC side
2. Disconnect the DC side
3. Wait at least 5 minutes until the condensers in the inverters have discharged.
Switching the Solar-Log™ off
•
Remove the power plug from the socket or the "Power 12 V" jack on the Solar-Log™.