Lenze E84DSxxx - Manual (Page 107)

Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
107
5 Motor control (MCTRL)
5.2 Selecting the control mode
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2 Selecting the control mode
The 8400 protec StateLine controller supports various modes for motor control (open loop or closed
loop).
• The V/f characteristic control (VFCplus) is preset with a linear characteristic.
• The control mode can be selected in the »Engineer« on the Application parameter tab via the
Motor control ( C00006 ) list field:
• A click on the Motor control... button leads you to the parameterisation dialog of the selected
motor control. (The button is labelled according to the selected motor control.)

Tip!
In order to make the selection of the motor control easier, we provide a selection help with
recommendations and alternatives for standard applications in the subchapter entitled
" Selection help ". ( 110)
The following section briefly describe the control modes. A reference to more details can be found
at the end of each section.