Lenze E84DSxxx - Manual (Page 562)

15 Parameter reference
15.2 Parameter list | C00567
562
Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00567
C00569
C00570
Parameter | Name:
C00567 | Resp. to speed controller limited
Data type: UNSIGNED_8
Index: 24008
d
= 5DC8
h
Response if speed controller output is limited (bLimSpeedCtrlOut = TRUE)
Selection list
(Lenze setting printed in bold)
0 No Reaction
1 Fault
5 Warning
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00569 | Resp. to peak current
Data type: UNSIGNED_8
Index: 24006
d
= 5DC6
h
Configuration of monitoring of the motor control (group 1)
Selection list
0 No Reaction
1 Fault
5 Warning
Subcodes Lenze setting Info
C00569/1 0: No Reaction Response for overcurrent detection and clamp operation
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00570 | Resp. to controller limitations
Data type: UNSIGNED_8
Index: 24005
d
= 5DC5
h
Configuration of monitoring of the motor control (group 2)
Selection list
0 No Reaction
1 Fault
5 Warning
Subcodes Lenze setting Info
C00570/1 0: No Reaction Response if direct-axis current controller is limited
C00570/2 0: No Reaction Response if cross current controller is limited
C00570/3 0: No Reaction Response if torque setpoint is limited
• Limitation of the speed controller output, the
differential setpoint feedforward control, and the
additive torque at sensorless vector control ( SLVC ).
C00570/4 0: No Reaction Response if field controller is limited
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1