Lenze E84DSxxx - Manual (Page 559)

Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
559
15 Parameter reference
15.2 Parameter list | C00505
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00505
C00507
C00516
Parameter | Name:
C00505 | Password data
Data type: VISIBLE_STRING
Index: 24070
d
= 5E06
h
From version 06.00.00
 Device access protection
Subcodes Lenze setting Info
C00505/1 MasterPin
C00505/2 Binding ID
C00505/3 Password
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT
Parameter | Name:
C00507 | Current password protection
Data type: UNSIGNED_16
Index: 24068
d
= 5E04
h
From version 06.00.00
Display of the currently active device access protection
 Device access protection
Display area (min. hex value | max. hex value)
0x0000 0xFFFF
Value is bit-coded:
Bit 0 Only access to user menu
Bit 1 Parameter write protection
Bit 2 Parameter read protection
Bit 3 Reserved
Bit 4 Reserved
Bit 5 Reserved
Bit 6 Reserved
Bit 7 Reserved
Bit 8 Reserved
Bit 9 Reserved
Bit 10 Reserved
Bit 11 Reserved
Bit 12 Reserved
Bit 13 Reserved
Bit 14 Reserved
Bit 15 Memory module binding on
Subcodes Info
C00507/1 Password protection - all communication channels
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT
Parameter | Name:
C00516 | Checksums
Data type: UNSIGNED_32
Index: 24059
d
= 5DFB
h
This code is for device-internal use only and must not be written to by the user!