Lenze E84DSxxx - Manual (Page 669)

Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
669
16 Working with the FB Editor
16.2 User interface
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
"Application interconnection" level
This level displays the interconnection of the application selected in
C00005 in detail. All function
blocks used in the application and the system blocks which provide the interfaces to the drive and
motor interface and to the MotionControlKernel (MCK) are displayed with their connections.
• The interconnection of the I/Os of the controller with the inputs and outputs of the application
is masked out in this level.
[16-6] Schematic diagram of "Application interconnection"

Tip!
Every application block features so-called "free inputs and outputs" which you can use to
transfer signals from the I/O level to the application level and vice versa.
• In the Lenze setting, these connectors are hidden in the function block editor.
• These connections can be shown via the Connector visibilities command in the Context
menu of the application block.

Note!
With the "StateLine" version, the interconnection shown in the application level cannot
be edited.