Lenze E84DSxxx - Manual (Page 300)

8 Basic drive functions (MCK)
8.2 Internal interfaces | System block "LS_MotionControlKernel"
300
Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
bBrkReleaseOut
BOOL
Trigger signal for switching element holding brake control via a digital output
• Use bit 0 in C02582 to activate inverted switching element triggering.
 Holding brake control
FALSE Apply brake.
TRUE Release brake.
bBrkReleased
BOOL
"Brake released" status signal considering the brake release time
• When the holding brake is triggered to close, bBrkReleased is immediately reset
to FALSE even if the brake closing time has not yet elapsed!
 Holding brake control
TRUE Brake released (after the brake release time has expired).
Identifier
Data type
Value/meaning