Lenze E84DSxxx - Manual (Page 475)

Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
475
15 Parameter reference
15.2 Parameter list | C00006
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00006
Parameter | Name:
C00006 | Motor control
Data type: UNSIGNED_8
Index: 24569
d
= 5FF9
h
Selection of the motor control mode
 Motor control (MCTRL) : Select control mode
Selection list (Lenze setting printed in bold) Info
4 SLVC: Vector control This control type is used for sensorless vector control of
an asynchronous motor.
• The control type requires motor parameters to be set
as exactly as possible!
 Sensorless vector control
6 VFCplus: V/f linear This control type is used for the speed control of an
asynchronous motor via a linear V/f characteristic and is
the simplest control type.
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f characteristic control
7 VFCplus: V/f linear + encoder This control type is used for speed control of an
asynchronous motor via a linear V/f characteristic.
• The control type requires a speed feedback via an
encoder mounted to the motor!
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f control
8 VFCplus: V/f quadr This control type is used for speed control of an
asynchronous motor via a square-law V/f characteristic.
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f characteristic control
9 VFCplus: V/f quadr + encoder This control type is used for speed control of an
asynchronous motor via a square-law V/f characteristic.
• The control type requires a speed feedback via an
encoder mounted to the motor!
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f control
10 VFCplus: V/f definable This type of control is used for the speed control of an
asynchronous motor via a user-definable characteristic
with several interpolation points.
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f characteristic control
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1