Lenze E84DSxxx - Manual (Page 339)

Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
339
9 Diagnostics & error management
9.6 Logbook
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.6.5 Storing the logbook in the project
If you want to display the currently available logbook entries at a later date in offline mode, i.e.
without a connection to the controller, you can store the current logbook in the project.

How to store the logbook in the project:
Go to the Logbook dialog box and click the File in project button.
• The logbook with all the entries uploaded up to now is stored in the Engineer project
independent of the set filter criteria.
• A logbook of the same device already stored before will be overwritten without querying the
user.
• The filter settings are not stored in the project.
• When a logbook is filed in the project, the logbook can also be opened in offline mode via the
Logbook button on the Diagnostics tab.

Note!
Storing the logbook changes the project.
• When the project is closed, you are asked to save the changed project.
• Only if the changed project is saved, the new logbook entries stored in the project
remain stored.