Lenze E84DSxxx - Manual (Page 477)

Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
477
15 Parameter reference
15.2 Parameter list | C00008
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00008
"Switch-off positioning" TA
Input/output 10: Terminals 0 12: Terminals 2 14: Terminals 11 16: Terminals 16
RFR Controller enable Controller enable / Reset of error message
DI1 Fixed setpoint 1/3 Stop function 1 Fixed setpoint 1/3
DI2 Fixed setpoint 2/3 Stop function 2 Selection: Pre-switch off 1 Fixed setpoint 2/3
DI3 Reset error message CW rotation quick stop
Selection: Switch-off position 1
CW rotation quick stop
DI4 Change of direction of
rotation
CCW rotation quick stop
Selection: Switch-off position 2
CCW rotation quick stop
DI5 - - Stop function 2 -
DI6 - - Selection: Pre-switch off 2 -
A1U Main speed setpoint (10 V ≡ 100 % reference speed)
Parameter | Name:
C00008 | Original application|control source
Data type: UNSIGNED_16
Index: 24567
d
= 5FF7
h
Display of the originally selected technology application and the originally selected control mode.
• This parameter shows the selection that was set with C00005 and C00007 before a change in the I/O level or the
application level was carried out.
• For diagnostic purposes, this display serves to determine whether there is a standard interconnection in the
controller or a change carried out by the user.
Selection list
(read only)
Info
0 Free|Free Application: Interconnection has been changed.
I/O level: Interconnection has been changed.
10 Free|Terminal0 Application: Interconnection has been changed.
I/O level: "Terminals 0" control mode
12 Free|Terminal2 Application: Interconnection has been changed.
I/O level: "Terminal 2" control mode
14 Free|Terminal11 Application: Interconnection has been changed.
I/O level: "Terminal 11" control mode
16 Free|Terminal 16 Application: Interconnection has been changed.
I/O level: "Terminal 16" control mode
20 Free|Keypad Application: Interconnection has been changed.
I/O level: "Keypad" control mode
21 Free|PC Application: Interconnection has been changed.
I/O level: "PC" control mode
30 Free|CAN Application: Interconnection has been changed.
I/O level: "CAN" control mode
40 Free|MCI Application: Interconnection has been changed.
I/O level: "MCI" control mode
1000 Speed|Free Application: Actuating drive speed
I/O level: Interconnection has been changed.
1010 Speed|Terminal0 Application: Actuating drive speed
I/O level: "Terminals 0" control mode
1012 Speed|Terminal2 Application: Actuating drive speed
I/O level: "Terminal 2" control mode
1014 Speed|Terminal11 Application: Actuating drive speed
I/O level: "Terminal 11" control mode
1016 Speed|Terminal16 Application: Actuating drive speed
I/O level: "Terminal 16" control mode