2 creating a connection using port identifiers, Creating a connection using port identifiers, 16 working with the fb editor – Lenze E84DSxxx User Manual
Page 694
16
Working with the FB Editor
16.4
Reconfiguring the predefined interconnection
694
Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
16.4.4.2
Creating a connection using port identifiers
How to create a connection with port identifiers:
1. Click the port identifier.
• The selected port is highlighted in light green:
2. Drag the port segment to the required port while keeping the left mouse button pressed:
After releasing the mouse button, the connection via port identifiers (flags) is created. The
corresponding port identifier consists of the block name and the name of the input/output:
Tip!
The command Show as line in the context menu of a flag serves to change the
representation of the connection at any time.