Lenze E84DSxxx - Manual (Page 442)

11 PROFIBUS/PROFINET option
11.1 Selection of the communication option
442
Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11 PROFIBUS/PROFINET option
The 8400 protec StateLine controller is also available with a PROFIBUS or PROFINET interface in
order to take part in the data transfer of a fieldbus system.
When using one of these options, the major advantage for the user is the possibility of
parameterising, controlling, and diagnosing the drive system via the available fieldbus.
11.1 Selection of the communication option
If you insert the 8400 protec StateLine controller via the Insert a component dialog into the Project
view of the »Engineer«, you will be queried in the second dialog step Device modules about the
communication and safety system in the device.

Select the available option in the Communication list field in order that the related
communication parameters & parameterisation dialogs are available in the »Engineer«.

Tip!
The available communication option can also be assigned subsequently to the device in the
»Engineer« any time:
1. In the Project view, select the 8400 protec StateLine controller.
2. Click the icon.
3. Select the available communication option in the Insert device module dialog box.
4. Press Complete to confirm your selection.
11.2 Parameter setting
All codes which must be parameterised for establishing the fieldbus communication are saved in
the memory module of the controller.
The archived data can be addressed by all bus systems supported by the controller.

Detailed information on PROFIBUS/PROFINET is provided in the communication manual
(KHB) for the respective fieldbus and in the »Engineer« online help.

The codes of the corresponding communication option are described in the respective
online help and in the communication manual (KHB).