Lenze E84DSxxx - Manual (Page 700)

16 Working with the FB Editor
16.4 Reconfiguring the predefined interconnection
700
Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7. If there are still elements to be entered in the list, repeat steps 5 and 6 until all elements are
inserted as intended.
8. Press Close to stop the insertion and close the dialog box.
• You can also use <Esc> or <Enter> to close the dialog box if "Insert" is not active.
• The elements inserted into the target interconnection so far are maintained.
• The connections for the blocks inserted so far are inserted depending on the selected
option.