Lenze E84DSxxx - Manual (Page 308)

8 Basic drive functions (MCK)
8.4 Holding brake control
308
Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.4.2 Parameter setting

How to go to the parameterisation dialog of the holding brake control:
1. »Engineer« Go to the Project view and select the 8400 protec StateLine controller.
2. Select the Application parameters tab from the Workspace.
3. Go to the Overview dialog level and click the "Basic functions" button.
4. Go to the Overview  Basic functions dialog box and click the Holding brake control button.

Danger!
A faultless brake control function requires a correct setting of the different deceleration
times in the following parameters!
A wrong setting of the delay times can cause a faulty control of the brake!