Lenze E84DSxxx - Manual (Page 567)

Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
567
15 Parameter reference
15.2 Parameter list | C00594
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00594
C00597
C00598
Parameter | Name:
C00594 | Resp. to control word error
Data type: UNSIGNED_8
Index: 23981
d
= 5DAD
h
Configuration of device control monitoring
Selection list
0 No Reaction
1 Fault
2 Trouble
3 TroubleQuickStop
5 Warning
Subcodes Lenze setting Info
C00594/1 1: Fault Response if error bit 14 in the CAN control word is set.
C00594/2 1: Fault Response if error bit 14 in the MCI control word is set.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00597 | Resp. to motor phase failure
Data type: UNSIGNED_8
Index: 23978
d
= 5DAA
h
Response to motor phase failure
• If a phase current does not exceed the threshold set in C00599 for more than one period, the response set here
will be triggered.
Selection list (Lenze setting printed in bold)
0 No Reaction
1 Fault
5 Warning
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00598 | Resp. to I/O monitoring
Data type: UNSIGNED_8
Index: 23977
d
= 5DA9
h
Configuration of analog input monitoring
 Analog terminals
Selection list
0 No Reaction
1 Fault
2 Trouble
3 TroubleQuickStop
5 Warning
Subcodes Lenze setting Info
C00598/1 3: TroubleQuickStop Response to open circuit at AIN1 if configured as
4 ... 20 mA current loop
C00598/2 0: No Reaction Reserved
C00598/3 5: Warning Resp. to digital output level
C00598/4 5: Warning Resp. to IO supply overload
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1