Lenze E84DSxxx - Manual (Page 159)

Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
159
5 Motor control (MCTRL)
5.7 Parameterisable additional functions
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
[5-14] Example 2: Signal characteristic for automatic DC-injection braking of a drive with speed feedback
 Speed setpoint
 Actual speed value of the motor
 Output current of the controller
 Pulse inhibit
 DC-injection braking is active
 The motor rotates at the selected
speed. The resulting current depends
on the load, see .
 The DC braking current set in
C00036 is injected.
 The actual speed value of the
motor follows the speed setpoint.
The resulting current depends on the
load.
0
1
2
3
4
 ‚
C00036
C00019
ƒ