Lenze E84DSxxx - Manual (Page 180)

5 Motor control (MCTRL)
5.10 Monitoring
180
Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.10.1 Device overload monitoring (Ixt)
C00064/1...3 displays the device utilisation (ixt) in [%] in different time intervals:
• If the device utilisation reaches the switch-off threshold set in C00123 :
• the "Fault" error response is returned.
• The "
OC5: Ixt overload " error message will be entered into the Logbook.
• The bMctrlIxtOverload status output of the LS_DeviceMonitor system block will be set to
TRUE.
Parameter Info
C00064/1 Device utilisation (Ixt)
• Maximum value of pulse utilisation ( C00064/2 )
and permanent utilisation ( C00064/3 ).
C00064/2 Device utilisation (Ixt) 15s
• Pulse utilisation over the last 15 seconds (only for loads >160 %).
C00064/3 Device utilisation (Ixt) 3 min
• Permanent utilisation over the last 3 minutes.
Highlighted in grey = display parameter