Lenze E84DSxxx - Manual (Page 43)

Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
43
3 Commissioning
3.4 Preconditions for commissioning with the »Engineer«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.4 Preconditions for commissioning with the »Engineer«
For commissioning, you need
• a PC that satisfies the following requirements:
• processor with 1.4 GHz or higher
• at least 512 MB RAM and 650 MB free hard disc space
• Microsoft® Windows® 2000 operating system (from service pack 2 onwards) or
Windows® XP
• the Lenze »Engineer« PC software
• a connection to the controller, e.g. via a USB diagnostic adapter:
• connect the USB diagnostic adapter to the X70 diagnostic interface.
• establish a connection between the USB diagnostic adapter and the PC via a free USB port.

Tip!
How to obtain/update the L-force »Engineer« software:
• Download from the Internet:
The full version of the »Engineer StateLevel« is provided free of charge. Current software
can be found on the Internet in the "Services & Downloads" area under
http://www.Lenze.com .
• Requesting the CD
You can also request the L-force »Engineer« separately on CD free of charge at your Lenze
representative. See the "About Lenze" area on our homepage for e.g. the corresponding
German address.