Lenze E84DSxxx - Manual (Page 445)

Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
445
11 PROFIBUS/PROFINET option
11.4 Control mode "MCI"
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11.4 Control mode "MCI"
"40: MCI" can be selected as a control mode in C00007 in order to quickly and easily set-up drive
controller control by means of MCI-PDOs via the fieldbus interface.
Given that the technology applications are fundamentally different and have different
requirements regarding the signals sent to them, predefined assignment of the MCI-PDOs depends
on the technology application selected in C00005 :
• TA "Actuating drive speed":
Process data assignment for fieldbus communication ( 256)
• TA "Abschaltpositionierung":
Process data assignment for fieldbus communication ( 283)

Tip!
The predefined assignment of the MCI-PDOs can be parameterised by means of PDO
mapping and can be freely configured on the I/O level in the function block editor (FB
editor).