Lenze E84DSxxx - Manual (Page 789)

Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
789
17 Function library
17.2 System blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
17.2 System blocks
This chapter describes the system blocks which are available for the controller in the FB Editor.
Overview of system blocks available

The function blocks are described in the previous chapter " Function blocks ". ( 710)
System block Function can be inserted into
level:
I/O Appl.
LS_AnalogInput Interface to the analog input terminals
 Analog terminals ( 221)

LS_CANManagement Control of internal functions of the CAN driver and display of the
"Operational" status as well as the node address
 CANopen option ( 371)

LS_DataAccess Lenze internal only 
LS_DeviceMonitor Motor control status signals
 Motor control (MCTRL) ( 98)

LS_DigitalInput Interface to the digital input terminals
 Digital terminals ( 198)

LS_DigitalOutput Interface to the digital output terminals
 Digital terminals ( 198)

LS_DisFree Display of 4 arbitrary 16-bit signals of the application on display
codes
 
LS_DisFree_a Display of 4 arbitrary analog signals of the application on display
codes
 
LS_DisFree_b Display of 8 arbitrary digital signals of the application on a bit
coded display code
 
LS_DriveInterface Interface to drive control (DCTRL)
 Device control (DCTRL) ( 67)

LS_IRInterface SB in preparation! 
LS_Keypad Control via keypad 
LS_MotionControlKernel Interface to the basic drive function implemented in the Motion
Control Kernel (MCK)
 Basic drive functions (MCK) ( 295)

LS_MotorInterface Interface to motor control (MCTRL)
 Motor control (MCTRL) ( 98)

LS_ParFix Output of frequently used constants (TRUE, FALSE, 100 %, etc.) to
be used in the interconnection

LS_ParFree Output of 4 parameterisable 16-bit signals 
LS_ParFree_a Output of 4 parameterisable analog signals 
LS_ParFree_b Output of 16 parameterisable digital signals 
LS_ParFree_v Output of 4 parameterisable speed signals 
LS_ParReadWrite_1
...
LS_ParReadWrite_3
Reading/Writing of local parameters 
LS_PulseGenerator Output of 9 fixed frequencies and 1 parameterisable frequency 
LS_ServiceSwitch Output of the switching status of the optional service switch 
LS_SetError_1 Parameterisable responses to user-defined events are tripped
 Diagnostics & error management ( 322)
