Bio-Rad EXQuest Spot Cutter - Manual (Page 108)

Viewing and Editing Images
3-29
image detail. The crosshair will make it easier to position the box in the other
images so that it encloses the same area.
3. Select Save Crop Settings from the submenu, enter a name for the current crop
settings in the pop-up box, and click Apply.
4. Complete the crop action in the current image by positioning your cursor inside
the box slightly off-center and clicking to perform the crop, as described in
Cropping Images.
5. Open or select the next image you want to crop, select Load Crop Settings from
the submenu, and select the name of the settings you saved. The crop box and
crosshair will appear on the image.
6. Reposition the crop box so that the crosshair is correctly aligned with the
appropriate image object, then complete the crop as described in step 4 above.
To delete any crop settings you have saved, select Delete Crop Settings from the
submenu and choose the settings to be deleted from the list.
3.14 Flipping and Rotating Images
The matching functions in PDQuest will tolerate minor distortions in the shape and
orientation of images. However, if your images are grossly misaligned, you may have
to flip and/or rotate them. These commands are located on the Image menu and
toolbar.