Bio-Rad EXQuest Spot Cutter - Manual (Page 305)

PDQuest User Guide
9-16
Fig. 9-7. Integrated excision tool.
1. Select the Cut List. In this step, you select the cut list created using the Excision
Gel Selection tool, and specify which cuts you want to perform for this run.
2. Select Cutter Options. In this step, you select the options for the current cut run.
3. Select Microtiter Plate. In this step, you select a microtiter plate and specify the
starting well.
4. Align the Images. Next, you click the Align button and align the first MatchSet
image and the spot cutter image.
5. Finally, you perform the cut run. When the run is complete you can recut spots if
necessary.
2
Cut list
1
3
4