Bio-Rad EXQuest Spot Cutter - Manual (Page 240)

Analysis Sets and Annotations
7-13
Fig. 7-5. Statistical Analysis Type
Statistical analysis sets only work with replicate groups or classes, because the tests
require multiple gels.
Enter a name for the analysis set at the top of the dialog box.
Note: If you have Normalization enabled, normalization parameters will be used for
spot quantities. See Section 6.7, Normalization, for further information.
Select whether you want to compare replicate gels or classes, then choose which
members to compare by clicking on the drop down buttons for A and B.
Indicate the statistical test you want to perform by clicking on the button next to the
name of the test. Use the radio buttons to refine the confidence level.