Bio-Rad EXQuest Spot Cutter - Manual (Page 89)

PDQuest User Guide
3-10
Displaying Sections of an Image
To display one of nine sections of an image or MatchSet/scanset, go the 3x3 Sections
submenu on the View > Advanced View submenu, and select a region (Upper Left,
Middle, Lower Right, etc.) That region will be magnified in the image or MatchSet/
scanset.
Pan means to move the camera, (or the focus of your gel), to the right or left, up or
down.
All Windows indicates that the selections you have made in the Advanced View
submenu will be applied to every window in your set.
Location in Gel
Location in Gel on the View>Advanced View submenu displays a graphical overlay
on a subwindow or all subwindows showing the region that is displayed (green box)
relative to the entire image (blue box). Select the command, then click the image.
3.7 Hiding Overlays
To conceal spot markings, graphs, information boxes, etc. in a
subwindow or multiple subwindows, select Hide Overlays from the main
toolbar or View menu and click in the subwindow, or use the F4 key
command in the subwindow.
Note that, by default, hiding the overlays in one image of a MatchSet or scanset will
hide them in all the other subwindows. To turn off this feature, deselect the Auto “All
Same” checkbox under Display Preferences (Edit > Preferences).
Note: Shift+F4 (Hide All Overlays) will conceal overlays in all subwindows regardless
of whether Auto “All Same” is selected.