A.1 gel doc acquisition window – Bio-Rad EXQuest Spot Cutter User Manual

Page 353

Advertising
background image

PDQuest User Guide

A-2

To use the Gel Doc, you will need to have the Bio-Rad-supplied acquisition board
installed in your PC or Macintosh. The drivers for this board will be installed when
you install the main software application.

Make sure that your Gel Doc camera is turned on. If the camera is not turned on, the
Gel Doc acquisition window will open and an image capture error will be displayed.

Simulation Mode

Any of the imaging device acquisition windows can be opened in “simulation mode.”
In this mode, an acquisition window will open and the controls will appear active, but
instead of capturing real images, the window will create “dummy” images of
manufactured data.

You do not need to be connected to an imaging device to open a simulated acquisition
window. This is useful for demonstration purposes or practice scans.

To enter simulation mode, hold down the

CTRL

key and select the name of the device

from the File menu. The title of the acquisition window will indicate that it is
simulated.

A.1 Gel Doc Acquisition Window

To acquire images using the Gel Doc, go to the File menu and select Gel Doc.... The
acquisition window for the instrument will open, displaying a control panel and a
video display window.

Advertising
This manual is related to the following products: