Bio-Rad EXQuest Spot Cutter - Manual (Page 188)

Matchsets
5-37
Click Add to open the Select Member dialog where you can highlight the MatchSets
you want to include. Click open and they will display in the Members list. Select one
Matchset Master gel to use as the MatchSet Master.
Note: The MatchSets you select must be writable (i.e., not locked or read-only). See
your Macintosh or Windows documentation for instructions on making files
writable.
When you have made your selections, click the Save button.
The higher level MatchSet is displayed in a single window with subwindows, just like
a level 1 MatchSet.
You can add members to, remove members from, and reorder members in higher level
MatchSets just like level 1 MatchSets. These commands are described in 5.1,
Creating a MatchSet.
Landmark and match spots in a higher level MatchSet just as you do in a level 1
MatchSet. See 5.4, Landmarking Spots and 5.3, Matching Spots.
You will be prompted to select a template to use as the Master for the Higher level
MatchSet. This is similar to selecting the Master template in a level 1 MatchSet
Note that when you select the template for the Master, you will be prompted to copy
the Standard Spot Numbers from that template into the higher level Master. Click Yes
to copy the numbers, or No to assign new numbers. You can also transfer numbers
from the MatchSet member of your choice later.
5.9 Matching Summary
The Matching Summary dialog contains information regarding the gels associated
with the current MatchSet. Open the Matching Summary dialog by selecting
Matching Summary from the Match menu.