Bio-Rad EXQuest Spot Cutter - Manual (Page 63)

PDQuest User Guide
2-32
Fig. 2-21. Export MatchSet Data dialog box.
Next to the Data to export options, select the characteristic of the spot that you want
to export.
Specify the spots whose data should be exported. You can choose either all the spots
in the MatchSet, those spots that are completely matched in every member of the
MatchSet or the spots in a particular Analysis Set.
The Spot Count automatically adjusts to reflect the total number of spots selected.
If you are exporting spot quantity data, select either estimated or specified as the way
in which saturated spots and unmatched spots are reported.
The quantitation of saturated spots can be estimated, reported as (-3.0), or reported in
some other way that you specify. If you opt for the latter, enter the value that should
be reported in the Specify field.
If a spot is unmatched in one or more members of a MatchSet, it can be reported as
the minimum spot quantitation value (the minimum quantity needed for a spot to be