Bio-Rad EXQuest Spot Cutter User Manual
Page 21
PDQuest User Guide
1-8
SCSI:
Required for all Bio-Rad imaging devices except the Gel
Doc, ChemiDoc, ChemiDoc XRS, and VersaDoc systems.
Adaptec SCSI card recommended.
Printer:
Optional.
Macintosh
The following is the recommended system configuration for installing and running
on a Macintosh:
Operating system:
System 9.0 or higher, excluding Mac OS X.
Processor/Model:
PowerPC G3 processor or better.
RAM:
≥
256 MB for all Bio-Rad imaging systems.
Hard disk space:
≥
3 GB
Monitor:
17" monitor, 1024 x 768 resolution (absolutely required),
Millions of colors.
SCSI:
Required for all Bio-Rad imaging devices except the Gel
Doc, ChemiDoc, ChemiDoc XRS, and VersaDoc systems.
Adaptec SCSI card recommended.
Printer:
Optional.
Note:
The default amount of memory assigned to this program on the Macintosh is 128
MB. If the total RAM in your Macintosh is 128 MB or less, you should reduce
the amount of memory assigned to the program to 10 MB less than your total
RAM. With the application icon selected, go to File > Get Info in your Finder to
reduce the memory requirements for the application. See your Macintosh
computer documentation for details.