Bio-Rad EXQuest Spot Cutter - Manual (Page 82)

Viewing and Editing Images
3-3
3.3 Assigning and Interchanging Images
You can use the Assign and Interchange commands to select the image you want to
display in a particular window or subwindow.
Assigning Images
To assign an image to a particular subwindow, select the Assign tool
from the main toolbar or Window menu and click in the subwindow, or
use the Ctrl+A key command in desired subwindow. This will open a
pop-up list of all the images currently loaded in the MatchSet or scanset.
Select an image name from the list; the image will appear in the selected window.
Fig. 3-2. Assign Image lists all the loaded images; select one to display it.
Interchanging Images
Interchange Images switches between the Raw 2-D scan, Filtered image, and
Gaussian image of the same gel within a selected subwindow. With the images
loaded, select the tool from the main toolbar or View menu and click in the
subwindow, or use the F11 key command in the subwindow. The type of image
currently displayed is listed at the bottom of each subwindow.
Interchange All Images (Shift+F11, View menu) switches between the Filtered
images and Gaussian images in all the displayed subwindows of a MatchSet.