Bio-Rad EXQuest Spot Cutter - Manual (Page 86)

Viewing and Editing Images
3-7
Imitate Zoom
Imitate Zoom applies the magnification and positioning of a selected window or
subwindow to all open windows and subwindows. This command only works on
comparable images with similar dimensions.
Note: Imitate Zoom is different than the Auto “All Same” setting under Display
Preferences, in that is affects all open windows, not just the subwindows in a
single window.
Select a window or subwindow you want to imitate, then select Imitate Zoom from
the Window menu. The other windows will change their display to match that of the
active window
Magnifying Sections of an Image
To magnify one of nine sections of an image or MatchSet/scanset, go the 3x3 Sections
submenu on the View > Advanced View submenu, and select a region (Upper Left,
Middle, Lower Right, etc.) That region will be magnified in the image or MatchSet/
scanset.
Location in Gel
Location in Gel on the View>Advanced View submenu displays a graphical overlay
on a subwindow or all subwindows showing the region that is magnified (green box)
relative to the entire image (blue box). Select the command, then click the image.
3.6 Positioning Images
The image positioning tools in PDQuest can be accessed from the main toolbar or
View menu, or by key command.
Note that, by default, if you reposition one image of a MatchSet or scanset in a
subwindow, all the other subwindows will be repositioned as well. To turn off this
feature, deselect the Auto “All Same” checkbox under Display Preferences (Edit >
Preferences).
Ctrl+F3 will “undo” your last positioning or other viewing command.