Bio-Rad EXQuest Spot Cutter - Manual (Page 53)

PDQuest User Guide
2-22
Fig. 2-14. Print Image dialog box.
In the General tab, select the printer and page range you want to use. In the Layout tab
select page orientation, duplex printing, and advanced options, if necessary. In the
Paper/Quality tab set the paper source, whether or not you want to print in color, and
advanced options, if necessary.
When you are satisfied with all the print parameters, click Print to send the image to
the printer.
2.5.b Print Actual Size
You can print your images at their actual size using the Print Actual Size command.
Note: If you are using the Gel Doc, ChemiDoc, Fluor-S, or Fluor-S MAX, you must
specify the correct image area size when capturing your images to ensure
accurate 1:1 printing. You can specify the image area size in the acquisition
window for the instrument. See the chapter on each imaging device for more
information.