Bio-Rad EXQuest Spot Cutter - Manual (Page 448)

G-1
Appendix G
Fluor-S MultiImager
Fig.G-1. Fluor-S MultiImager.
Before you can begin acquiring images using the Fluor-S
®
MultiImager, the imaging
system must be properly installed and connected with the host computer. See the
Fluor-S hardware manual for installation, startup, and operating instructions.
Note: Make sure that the temperature light on the Fluor-S is green before attempting to
capture an image. If you are using a PC, the Fluor-S should be turned on and the
initialization sequence completed before the host computer is turned on. See the
hardware manual for more details.