Bio-Rad EXQuest Spot Cutter - Manual (Page 288)

Basic Excision Tool
8-23
8.2.g Saving the Image
To save the image taken by the spot cutter, click the Save button in the Basic Excision
Tool window. You will be prompted to enter a name and specify a location for the
image before saving.
8.3 Other Spot Cutter Controls
Click the Move Head buttons (under Setup in the Basic Excision Tool
window) to move the cutting tip to the front left corner of the spot
cutter or the back right corner.
You can simulate the action of the cutter and its camera by clicking on the Simulate
Cutter and Simulate Camera checkboxes. These checkboxes will cut off
communication with the cutter and camera if selected. In simulation mode, you will
be prompted to open a file image of a gel in place of the camera cutter image.