Bio-Rad EXQuest Spot Cutter - Manual (Page 109)

PDQuest User Guide
3-30
Fig. 3-19. Flipping and rotating commands.
Note: These actions will erase any analysis you have performed on an image. You will
be asked to confirm the flip/rotation before the command is executed.
Flipping
To flip the image right-to-left, select Horizontal Flip from the Image menu or toolbar.
To flip the image top-to-bottom, select Vertical Flip.
90° Rotations
Select Rotate 90 Left, Rotate 90 Right, or Rotate 180 from the Image > Rotate menu
or Image toolbar to perform the specified rotation. You will be asked to confirm your
choice before the command is executed.
Custom Rotation
If you need to rotate your image in increments other than 90°, you can use the Custom
Rotation command.