Yaskawa MP2300S Basic Module - Manual (Page 34)

2.2 Basic Module
2.2.2 External Appearance, LED Indicators, and Switch Settings
2-8
2.2.2 External Appearance, LED Indicators, and Switch Settings
( 1 ) External Appearance
( 2 ) Indicators
The following table shows the indicators that show the operating status of the Basic Module and error information.
ΠFor details on indicator meanings, refer to 9.2 LED Indicator Meanings .
MP
/
E thernet
LINK
00 23 S
&%
&%
8
4.;
176
0V
;#5-#9#
6'56
4&;
#./
/6:
64:
470
'44
$#6
+2
59

59

10
10
%0()
+06
572
/10
5612
$#66'4;
M- I/II
'
'6'56 +06
01
01
LED 1 indicators
DTP switch (SW1)
DTP switch (SW2)
MECHATROLINK
connector
LED 2 indicator
Ethernet connector
LED 2 indicator
Power supply connector
RLY OUT connector
Indicator Color Status
<LED1>
RDY Green Lit during normal operation.
RUN Green Lit during execution of user program.
ALM Red Lit or blinks when warning occurs.
ERR Red Lit or blinks when malfunction occurs.
MTX Green
Lit when submitting MECHATROLINK-I/ MECHA-
TROLINK-II data.
BAT Red Lit during battery alarm.
TRX Green Lit when transmitting and receiving Ethernet data.
IP Green
Lit after IP address setting is set
Blinks when Ethernet port fails
<LED2>
• LINK
• 100M
(Part of Ethernet connec-
tor)
LINK Yellow Lit when connected to Ethernet.
100M Green
Lit when transmitting data at 100 Mbps or during automatic
negotiation at 100 Mbps.
Not lit when transmitting data at 10 Mbps or during auto-
matic negotiation at 10 Mbps.
RDY
ALM
MTX
RUN
ERR
BAT
TRX IP