A-92, 2 ) non-procedural parameter list – Yaskawa MP2300S Basic Module User Manual
Page 414
Appendix G MSG-SND/MSG-RCV Functions (Ethernet)
G.2 Message Receive Function (MSG-RCV)
A-92
( 1 ) MEMOBUS Parameter List
* It is IN/OUT for MODBUS/TCP.
Note: IN: Input, OUT: Output, SYS: For system use
( 2 ) Non-procedural Parameter List
Note: IN: Input, OUT: Output, SYS: For system use
Param No.
IN/OUT
Contents
Description
00
OUT
Process result
Outputs process results.
01
OUT
Status
Outputs the status of the communication device.
02
IN
Connection number
Specifies the remote source.
03
OUT
Option
Outputs a unique value for each communication device.
04
OUT
Function code
Outputs a function code requested from the transmission side.
05
OUT
*
Data address
Outputs the start address of data requested from the transmission
side.
06
OUT
Data size
Outputs the read/write data size requested from the transmission
side.
07
OUT
Remote CPU number
Outputs the remote CPU number.
08
IN
Coil offset
Sets the coil’s offset word address.
09
IN
Input relay offset
Sets the offset word address of an input relay.
10
IN
Input register offset
Sets the offset word address of an input register.
11
IN
Holding register offset
Sets the offset word address of a holding register.
12
IN
Write range LO
Sets the start address for a write range.
13
IN
Write range HI
Sets the last address for a write range.
14
SYS
Reserved 1
−
15 to 16
SYS
Reserved 2
−
Param No.
IN/OUT
Contents
Description
00
OUT
Process result
Outputs the process results.
01
OUT
Status
Outputs the status of the communication device.
02
IN
Connection number
Specifies the remote source.
03
OUT
Not used
−
04
OUT
Not used
−
05
OUT
Not used
−
06
OUT
Data size
Outputs the write data size requested from the transmission side.
07
OUT
Not used
−
08 to 11
IN
Not used
−
12
IN
Register offset
Sets the register's offset word address.
13
IN
Write range HI
Sets the last address for a write range.
14
SYS
Reserved 1
−
15 to 16
SYS
Reserved 2
−