A-93, 1 ) message receive function setting – Yaskawa MP2300S Basic Module User Manual

Page 415

Advertising

Appendix G MSG-SND/MSG-RCV Functions (Ethernet)

G.2 Message Receive Function (MSG-RCV)

A-93

Appendices

G.2.4 Function Setting and Parameter Details for MEMOBUS and Extended MEMO-

BUS Protocols

This section explains the MSG-RCV function setting and its parameter list details when MEMOBUS or Extended
MEMOBUS is used as a protocol.

( 1 ) Message Receive Function Setting

[ a ] 218IFA Setting Example

An example of a function setting when 218IFA is used as a communication device follows:
Set the protocol type to MEMOBUS even when used in Extended MEMOBUS protocol.
Set the circuit number in accordance with the circuit number allocated to the target 218IFA.
Set a unique communication buffer channel number for the same circuit.
For information on the register number, refer to G.2.2 ( 1 ) Input Item and G.2.2 ( 2 ) Output Item.

[ b ] 218IF Setting Example

An example of a function setting when 218IF is used as a communication device follows:
Set the protocol type to MEMOBUS even when used in Extended MEMOBUS protocol.
Set the circuit number in accordance with the circuit number allocated to the target 218IF.
Set a unique communication buffer channel number for the same circuit.
For information on the register number, refer to G.2.2 ( 1 ) Input Item and G.2.2 ( 2 ) Output Item.

Execute

Communication device = 218IFA

Protocol = MEMOBUS

Circuit number = 1

Communication buffer channel number = 1

Parameter list start address = DA00000

(use DW00000-DW00016)

Abort

Dev-Typ
Pro-Typ

Cir-No
Ch-No
Param

MSG-RCV

Busy
Complete

Error

DB000201
DB000202
00016
00001
00001

DA00000

00001

DB000210
DB000211

DB000212