Yaskawa MP2300S Basic Module User Manual
Page 36
Advertising
2.2 Basic Module
2.2.2 External Appearance, LED Indicators, and Switch Settings
2-10
[ b ] SW2
Sets the Ethernet port condition and other operating conditions.
The change of switch setting is invalid after the power is turned ON (read only when the module is initialized by soft-
ware).
No.
Switch
Name
State
Operation Mode
Default
Description
S2-4
−
ON
Reserved
OFF
Reserved for future use
OFF
S2-3
−
ON
Reserved
OFF
Reserved for future use
OFF
S2-2
E-INIT
ON
Transmission parameter for
Ethernet, default
OFF
When ON, transmission parameters such as an IP
address are set to default at startup.
OFF
Normal operation
S2-1
E-TEST
ON
System use
OFF
Always leave set to OFF.
OFF
Normal operation
SW
2
E-INIT
NO
E-TEST
Advertising