Yaskawa MP2300S Basic Module - Manual (Page 54)

2.2 Basic Module
2.2.4 218IFA Module (Ethernet)
2-28
In addition, click the Default Button to set the default values for data code type, local I/O register setting, read/write
size, and node read/write register setting according to the selected communication protocol type.
The following table provides these default values.
Communication
Protocol Type
Default
Data Code
Type
Local Input/Output Register Setting Read/Write Size
Node Read/Write Register
Setting
Extended
MEMOBUS
BIN
IW †††† to IW †††† + 3 (input)
OW †††† + 4 to OW †††† +7
(output)
4 (read)
4 (write) MW0000 to MW0003 (read)
MW0004 to MW0007 (write)
MEMOBUS RTU Same as above Same as above Same as above
MELSEC BIN Same as above Same as above
D0000 to D0003 (read)
D0004 to D0007 (write)
MODBUS/TCP BIN Same as above Same as above
4X00001 to 4X0004 (read)
4X00005 to 4X0008 (write)