Yaskawa MP2300S Basic Module - Manual (Page 445)

Appendix H Optional Functions
H.2 Security
A-123
Appendices
[ b ] New Security Settings
Make a new security setting in the Security Setting Dialog Box.
1. Select the Apply File Reading Restriction (Ladder/Motion/C Language) Check Box, and then
select a restriction privilege level from 0 to 7.
Note: The display depends on the conditions that are set.
2. Enter a password of eight or less alphanumeric characters in the Security Key Field. For confirmation,
enter the same password in the Security Key Confirmation Field. To apply the security settings to the
Controller, click the Set Button.
The following figure will be displayed if the security settings have been normally applied to the Controller.