Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 225)

Entering Destinations Directly
For a destination that is not registered in the Address Book, specify it by entering a fax number.
1
Enter the fax number in the <Enter Dest.> tab.
● If you have entered an incorrect value, use to clear it.
Adding a destination
● To enter a second or subsequent destination, select <Next Dest.>.
If a confirmation screen appears
● When <Confirm Entered Fax Number> is set to <On>, the input screen reappears so that you can
confirm the destination ( Confirming the Entered Fax Number(P. 407) ). Enter the destination
again.
Sending a fax abroad
● Enter the international access code, the country code, and the fax number to specify the destination.
If you are not able to successfully connect to a recipient, select <Pause> and insert a pause between
numbers.
Specifying Destinations in an LDAP Server
If your office has an LDAP server installed, you can specify a destination using user
information in the server. Access the LDAP server via the machine to search for the
appropriate user information and specify it as destination.
● You need to specify the settings for connecting to an LDAP server beforehand. Registering LDAP
Servers(P. 65)
1
Select <LDAP Server> in the <Specify Destination> tab.
2
Select the LDAP server you are using.
3
Select conditions for user information to be searched.
● Name, fax numbers, e-mail addresses, organization names, and organization unit are available criteria for
searching destinations.
Faxing
217