Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 488)

<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special
Processing> <Special Paper Processing> <Paper Curl Correction> <On> <Yes>
● If you set to <On>, the printing speed may be slower.
<Reduce Ppr. Sticking at Output>
When performing 2-sided printing, paper may stick together at the output. Setting to <On> will slow down the
printing speed to reduce sticking.
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special
Processing> <Reduce Ppr. Sticking at Output> <On> <Yes>
<High Humidity Mode>
Print density may be uneven when the machine is used in an environment with high humidity. In this case,
setting this item to <On> may solve the problem.
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special Processing> <High
Humidity Mode> <On> <Yes>
● If you set to <On>, the print density may vary depending on the ambient humidity.
<Low Humidity Mode>
When using the machine in an environment with low humidity, printed images and text may be blurry. In this
case, set this item. The improvement effect is stronger with <Mode 2> than with <Mode 1>. First try the
adjustment with <Mode 1>.
<Off>
<Mode 1>
<Mode 2>
Setting Menu List
480